Powder coating and electrostatic painting of metal

Metal Frame Guide

Powder Coating and Electrostatic Painting: Chairs and Tables with Metal Frames

Whether it’s a cantilever chair, a dining chair with steel legs, a bar stool or a dining table with a steel frame, metal is an essential part of modern dining rooms. It is sturdy, sleek and available in a wide range of finishes. How long a metal frame retains its good looks depends primarily on its surface. At derStuhl, the metal parts of our chairs, benches and tables are electrostatically coated—a process that produces an even, hard-wearing and long-lasting finish.

In this guide, we explain how electrostatic painting and powder coating work, what advantages they offer over conventional wet paint, which metal finishes you can choose from, and how to care for metal chairs properly.

Key Takeaways

  • Electrostatic coating: The paint particles are electrically charged and attracted to the grounded metal, creating an even coat without runs.
  • Powder coating: The powder is cured in an oven at high temperatures, forming an especially hard, impact-resistant surface.
  • Three stages: Cleaning, applying the coating in the spray booth, and curing in the oven.
  • 12 metal finishes are available, from black to antique bronze, champagne and old brass.

How Does Electrostatic Painting Work?

With conventional spray painting, a lot of paint misses the target, and uneven coats or drips can easily form on edges and curves. Electrostatic painting uses a simple physical principle: the paint particles are electrically charged in the spray gun, while the workpiece is grounded. The charged particles are then attracted to the metal and coat the entire component evenly—even around tubes, edges and hard-to-reach areas. This is known as the wraparound effect.

Feature Electrostatic Conventional Spray Paint
Coat thickness Even Variable
Edges and curves Well covered Often too thin
Paint loss (overspray) Low High
Runs and drips Rare Possible
Durability High Medium

Our Three-Stage Painting Process

1

Thorough cleaning

The metal is thoroughly cleaned and degreased before coating. The paint will only adhere permanently to a clean surface.

2

Precise application

In the spray booth, the workpiece is sprayed with electrostatically charged paint, which spreads evenly across the surface.

3

Curing in the oven

The coated component is then cured at high temperatures in a special oven. This creates a hard, durable finish.

The result is a surface that withstands knocks, friction and the daily shifting of furniture far better than ordinary paint—exactly what dining chairs and table frames need.

Powder Coating: Solvent-Free Colour

The best-known form of electrostatic coating is powder coating. Instead of liquid paint, a fine powder made from synthetic resin, pigments and additives is applied. In the oven, the powder melts, flows into a continuous film and cures. Since no solvents need to evaporate, the process is more environmentally friendly, and any powder that does not adhere can be recovered.

Feature Powder Coating Wet Paint
Solvents None Depending on the paint
Coat thickness per application Thick, robust Thinner
Scratch and impact resistance Very high Medium
Range of colours and effects Wide, including metallic and textured finishes Wide
Environmental impact Good; powder can be reused Emissions possible

Alternative: Electrostatic Painting with Liquid Paint

In addition to powder coating, electrostatic painting can also be done with water- or solvent-based liquid paint. The paint particles are charged in this process too, but no curing oven is needed. This is advantageous for very large workpieces that will not fit in an oven, shortens drying time and allows for flexible, portable equipment with little paint loss.

Criterion Powder Electrostatic Liquid Paint
Curing oven Required Not required
Large workpieces Limited by oven size Well suited
Drying Cured in an oven Faster, no oven needed
Surface hardness Very high High

Our 12 Metal Finishes

Choose from twelve finishes for frames and legs, so the metal complements your table, upholstery and interior style:

Finish Look Pairs well with
Black 05 Graphic, timeless Almost anything, especially oak and cognac leather
Grey Understated Modern, bright rooms
Aluminium Light, technical Scandinavian style, white
Anodic Modern metallic Minimalist interiors
Magnum Dark metallic Industrial style
Antique bronze Warm, vintage Brandy leather, moss velvet
Brown copper Warm, reddish Copper or clay velvet
Mokka Warm, dark Natural tones, wood
Patina Aged, full of character Vintage, loft
Old brass Refined, golden Petrol or hunter-green velvet
Champagne Light golden, elegant Light fabrics, marble
Sunstone Warm shimmer Elegant accents

Colours may vary slightly depending on the light, screen and surface texture. Read about the latest colour trends in Furniture Colour Trends.

Metal Chairs: Models with Powder-Coated Frames

For many of these models, you can choose the upholstery and metal finish yourself; see each product page for the available options. Current prices are listed on the individual product pages.

Model Type Dimensions
FLEET OHIO Cantilever chair H 87 x W 50 x D 63, seat height 52 cm
FLEET ENVELOPE Cantilever chair H 87 x W 57 x D 63, seat height 52 cm
GIULIA Dining chair H 86 x W 57 x D 60, seat height 52 cm
PETRA Kitchen chair H 91 x W 61 x D 46, seat height 49 cm
ENEI Chair with tubular steel frame W 48 x D 60 x H 85 cm
ZANCA Chair with steel legs W 54 x D 60 x H 81 cm
FLEET 75 Bar stool See product page

Find more models in our collections of cantilever chairs, dining chairs and kitchen chairs. The frames of our oak tables, such as ZÜRICH, are also made of electrostatically painted steel; learn more in Oak Dining Table.

FLEET ENVELOPE in Petrol with vertical stitching and armrests
FLEET ENVELOPE
Cantilever chair, metal frame
ENEI sled chair in light brown, angled view
ENEI
Chair with tubular steel legs, leather
ZANCA upholstered chair in taupe with metal legs
ZANCA
Living room chair with steel legs
FLEET bar stool in cognac with sled base, angled view
FLEET 75
Bar stool, metal frame

Cantilever chairs: why only metal works here

A cantilever chair has no back legs. The frame made of bent steel tubing or flat steel forms a continuous sled base, on which the seat floats freely. When you sit down, the chair flexes slightly – a seating experience that many appreciate during long dinners. This construction requires a material that is both flexible and extremely resilient. That is exactly why cantilever chairs are made of metal.

The surface of cantilever chairs is particularly challenged: The sled bases rest on the floor, are pushed across the floor when pulled closer, and come into contact with shoes and table legs. A hard, uniform coating provides lasting protection for the metal here. Models like FLEET OHIO and FLEET ENVELOPE are classic cantilever chairs with powder-coated frames; an overview of materials and upholstery is provided by Leather Dining Chairs.

How to recognize a good coating?

Check point Good coating Poor coating
Surface Smooth and uniform, no bumps Runs, orange peel, inclusions
Edges and weld seams Fully covered Thin areas, bare metal
Inside of tubes and angles Uniformly coated Color variations, gaps
Gloss level Uniform across the entire frame Patchy
Feel Hard, sealed Soft, sticky

Repairing minor damage

Despite all precautions, if a dent occurs, you should treat the area promptly to prevent moisture from getting under the coating. Clean the area, let it dry, and apply a matching touch-up pen thinly in the frame color. We are happy to advise you on larger damage. Since our furniture is intended for dry indoor spaces, the risk of corrosion on minor dents is low.

Metal chair or wooden chair?

Criterion Metal frame Wooden frame
Appearance Slim, modern, delicate Warm, natural
Stability with a slim profile Very high Profile must be sturdier
Color selection 12 finishes Wood tone, possibly stained
Care Wipe with a damp cloth Wipe with a damp cloth, oil if necessary
Cantilever chair possible Yes No

Many dining rooms combine both: an oak table with chairs on metal frames. Tips on choosing chairs are provided by the guide Dining Chairs.

Combining frame color and upholstery

  • Tone on tone: A black frame with black leather (Cole) or gray with dark gray velvet creates a calm and graphic look.
  • Warm contrast: Antique bronze or brown copper with Buffalo Cognac or Brandy emphasizes the vintage character.
  • Elegant: Antique brass or champagne with velvet in petrol, hunter green, or natural brings a touch of Art Deco.
  • Light and airy: Aluminum or gray with fabrics in cream, beige, or sand fits into Scandinavian rooms.

Care of powder-coated metal

  • Regularly wipe with a soft, slightly damp cloth and dry with a dry cloth.
  • In case of soiling add a little mild dish soap to the water.
  • Do not use: scouring powder, abrasive cleaners, steel wool, solvents, thinners, or chlorine-containing products.
  • Intended use: our furniture is intended for indoor spaces without moisture.
  • Avoid impacts: Do not let chairs strike hard edges, felt glides protect the floor and frame.

Frequently Asked Questions

What is the difference between powder coating and lacquering?

Powder coating uses solvent-free powder that is baked in an oven, resulting in a thicker, harder layer than conventional wet lacquer.

Is powder coating scratch-resistant?

It is very resistant to scratches and impacts, but not indestructible. Sharp objects and abrasive cleaners can damage it.

Can chairs with metal frames go outside?

Our chairs are designed for indoor spaces without moisture.

How much weight can the chairs support?

Our dining chairs like FLEET OHIO support up to 130 kg according to the product specification.

Can I freely choose the frame color?

Yes, with many models you choose from 12 metal finishes.

How long does delivery take?

All furniture is manufactured according to your configuration, the delivery time is usually 6 to 12 weeks.

Chairs and tables with metal frames

Choose the upholstery, frame color, and model to your taste.

Products for Sale

Armlehnstuhl MAREI in Elfenbein, Schrägansicht
DINING CHAIRS
Freischwinger MOCANU im Industrial Stil in Cognac
OFFICE CHAIRS
Schalenstuhl ALBA in Greige, Schrägansicht
KITCHEN CHAIRS
Barhocker OLE mit Rückenlehne in Creme, Schrägansicht
BAR STOOLS
Barhocker SAMO in Taupe mit Armlehnen
KITCHEN ISLAND CHAIRS
Polsterstuhl SERENA mit Holzgestell, Schrägansicht
FABRIC CHAIRS
Bürosessel BOSS P mit Holzrückseite in Creme, Schrägansicht
ERGONOMIC OFFICE AND VISITOR CHAIRS
Besucherstuhl BIG STAR V mit Holzarmlehnen in Braun, Schrägansicht
ERGONOMIC OFFICE CHAIRS
Armlehnstuhl DORIAN ARM in Caramel, Schrägansicht
DESIGN CHAIRS
Sessel RUSO in Grau auf Metallgestell, Schrägansicht
ARMCHAIRS
Vintage Sofa GYMA in Olivgrün, frontal
SOFAS & COUCHES
Sessel MODIO dunkelbraun, bauchige Form, frontal
ARMCHAIR
Sitzbank CABALLERO aus Büffelleder in Cognac, Schrägansicht
BANKS
YANRO mit ovaler Platte, Schrägansicht
TABLES
Satztische RION, drei runde Tische mit Platten in Braun, Beispielausführung mit messingfarbenem Gestell
COFFEE TABLES