Corner bench in the dining room: five steps to the perfect dining nook
Dining Room Guide
Corner Bench in the Dining Room: Five Steps to the Perfect Dining Nook
In many dining rooms, the corner is the one place that remains empty. The table sits in the middle, the chairs need space all around, and where two walls meet, there is at most a plant or a basket. A corner bench in the dining room turns this area into the place where everyone sits for a while on Sundays. For this to work, the corner, bench shape, table, and chairs must match.
This guide takes you step by step from the initial measurements to the finished dining nook. The planner below translates your wall measurements into a scaled sketch, and each step shows real models from our production.
The Essentials in Brief
- The corner first, then the bench: Measure both walls from the corner of the room to the first obstacle, such as a door, radiator, window casing, or cabinet. Measure once just above the floor and once at seat height: baseboards and slightly crooked walls often cost a few centimeters.
- Left or right: The specification usually describes which side of the corner the long section is on when viewed from the front. You can order CORNER R with the long section on the left or right. Check the sketch before ordering.
- The table determines the comfort: Rectangular tables with sled bases, end panels, or an inward-set frame leave the way to the bench clear.
- One seat height for everyone: The modular CORA corner bench has a seat height of 49 cm, just like the DIXY chair. This way, no one sits lower at the table than the others.
- Space on the open sides: Our product pages recommend 75 to 90 cm between the table edge and the wall so that chairs can be pulled back comfortably.
This is about selecting and planning a corner bench. For more information on how long a straight bench should be and which seat height and seat depth are comfortable, read the guide Dining Room Bench: Length, Seat Height and Depth. The post Furnishing the Dining Room shows how the table, chairs, bench, and armchairs work together in the entire room.
Planning a Corner Bench in the Dining Room: The Planner in Five Steps
Go through the five steps in order. Each step explains what matters, shows a suitable model, and continues to calculate with your inputs. At the end, you will see your dining nook from above with the bench, table, and chairs. The calculation uses the dimensions of the modular corner bench CORA according to the product description: Module 1 with 60, 80, or 100 cm, a corner section measuring 85 × 85 cm, Module 2 with 180, 200, or 220 cm and a depth of 58 cm.
Step 1: Measure the corner
Measure both walls from the corner of the room to the first obstacle. This could be a door, a radiator, a window casing, or a cabinet. Measure once just above the floor and once at seat height: baseboards and slightly crooked walls often cost a few centimeters.
If there is a window above the bench, note the height of the windowsill. According to the product specifications, the backrest of CORA is 89 cm high, while that of CORNER is 87 cm. If the windowsill is below that, the backrest will hit it.
Example: With 300 cm and 240 cm of free wall, Module 2 with 200 cm, the corner section, and Module 1 with 100 cm fit. The planner calculates with your values when the page loads.
Step 2: Determine left or right
Stand in the room and look at the corner. If the long section is to the left of the corner, it is usually referred to as "long section on the left", and vice versa. The long section belongs on the wall with more free length. In the product image, the short section is on the left and the long one on the right, so "long section on the right". You can order CORNER R with the long section on the left or right, so also in mirrored orientation.
Because manufacturers do not use the terms consistently, it is best to include a small sketch with your order. The sketch below shows your choice from above and reflects the orientation as soon as you choose left or right.
The top view appears here as soon as the planner loads.
Step 3: Choose the right table
A rectangular table is best suited for a corner bench. What matters is where the legs are: if they are directly in front of the bench at the corners, it is difficult to slide into your seat. Sled bases or end panels and an inward-set frame keep the long sides clear.
The planner suggests the largest table length that fits the long section. You can choose any length from the product description.
For Module 2 with 200 cm, the planner recommends MILORO with 240 × 100 cm, for example.
Step 4: Chairs for the open sides
Chairs are placed along the open long side and at the end. Allow approximately 60 cm of table length per person. Pay attention to the seat height: CORA is 49 cm, CORNER 52 cm. Chairs with a similar seat height bring all guests to the same level.
For a table with a length of 240 cm, four chairs fit along the open long side.
Step 5: Your dining nook at a glance
The sketch shows your corner bench, table, and chairs to scale from above. The dashed area is the space chairs need to be pulled back. The seating places are guidelines from the product descriptions, not fixed seat numbers.
Example: CORA with 285 × 185 cm, MILORO table 240 × 100 cm, and four chairs along the open long side.
Planner assumptions: The table edge is approximately 50 cm in front of the wall on the bench side, because the table extends slightly over the front edge of the seat. For chairs, the planner allows 75 to 90 cm of space behind the table edge. Your room situation may differ from this.
Corner bench left or right? How to read the specification
In shops and brochures, specifications such as "long section on the left", "corner on the right", or "long side on the left" are used. This usually refers to the view from the front: you stand in the room, look at the backrest, and the long section is to the left or right of the corner. Because some providers also speak of the position of the corner itself, only the sketch counts in the end.
Long section on the left
The corner is on the right, the long part runs to the left along the wall.
Long section on the right
The corner is on the left, the long part runs to the right.
Which wall gets the long section?
The wall with more free length, often the window wall or the longer side of the room. The short section ends where a door, passage, or radiator begins.
What if I move?
A fixed corner bench no longer fits in a mirrored corner. With the modular CORA corner bench, the corner section and bench sections consist of individual elements. The modules can be combined in a different order and thus adapted to a differently oriented corner. For other configurations, write to us via the contact page.
Which corner bench fits? Modern models compared
We offer two ways to a corner bench: a bench made of modules with its own corner section, or two benches that together form an L. All information comes from the product descriptions.
| Model | Construction | Dimensions | Seat height | Frame | Good for |
|---|---|---|---|---|---|
| CORA | Module 1, corner section, Module 2 | Module 1: 60, 80, or 100 cm; corner section 85 × 85 cm; Module 2: 180, 200, or 220 cm; depth 58 cm; height 89 cm | 49 cm | Metal, powder-coated | Corners with precisely known dimensions, open-plan living-kitchens, and dining rooms |
| CORNER R + CORNER E | Bench with side panel plus straight bench | each 160, 180, 200, or 220 cm long; depth 68 cm; height 87 cm | 52 cm | Metal, powder-coated | spacious dining rooms, tables with a height of 75 to 80 cm |
| CORA bench | same modular system, listed as a kitchen bench | like CORA | 49 cm | Metal, powder-coated | straight wall or corner in the kitchen |
For the seat cushion and backrest, you can choose between velvet, fabric, and genuine leather for all three models. You also choose the color of the frame on the product page. The CORA modules can be combined in different orders. You can order CORNER R with the long section on the left or right. We also manufacture CORA in other dimensions on request, if your corner falls between the standard lengths.

Modules with corner section

Bench with panel, 160 to 220 cm

straight bench, 160 to 220 cm

Fabric modular system
Corner bench with table and chairs: three combinations of real models
A dining nook looks harmonious when the bench, table, and chairs share a common line: a frame material, related color tones, similar seat heights. These three combinations are assembled from models in our range.
Cognac and metal
CORNER R and CORNER E in cognac leather, together with the QUADRO oak table with a crossed steel frame and BADSAAL 3STARR chairs with armrests on the open side. The bench and chairs share the cognac tone and metal frame. With seat heights of 52 and 51 cm, they differ by only one centimeter.
Warm Rust Red
CORA in rust-red upholstery, as shown in the images of the CORA bench, together with MILORO with oak sled bases and the DIXY chair in rust brown. The bench and chairs have a seat height of 49 cm. The light wood of the table ties the warm tones together.
Compact in the Kitchen-Living Area
The shortest CORA combination with Module 1 in 60 cm and Module 2 in 180 cm, together with BORNERO in 160 × 90 cm and two ENEI sled chairs in light brown. The black sled bases of the chairs echo the black legs of the bench. More ideas for small spaces can be found in the guide Furnishing a Small Kitchen.
In Austria, people often say "corner bench with table and armchair," meaning the same dining chairs. A complete set of a bench, table, and chairs is called a corner bench set in retail. With us, you assemble the set from individual models, so every piece fits your corner. The basic rules for combining a table and chairs are explained in the article Combining Dining Tables and Chairs.
The Right Table for a Corner Bench: Legs, Shape, and Length
The table is the piece you feel most when using a corner bench: when sliding in, standing up, and at every meal with guests. Three points help with the selection.
Rectangular Instead of Round
A rectangular table follows both sides of the bench and makes use of the corner. With a round table, a gap remains between the tabletop and the bench, and the seats in the corner are harder to reach.
Legs Away from the Bench
Sled bases, aprons, or a frame in the center of the table leave the long side free. Four legs at the corners stand exactly where you slide onto the bench.
Length Matching the Long Side
The table should extend approximately as far as the long side. If it extends far beyond, a space without a bench is created. If it remains significantly shorter, no one will sit at the end of the bench.
| Table | Frame | Length × Width | Height | Access to the Bench |
|---|---|---|---|---|
| MILORO | Sled base made of solid oak | 140 to 200 × 90 cm, 200 to 260 × 100 cm | 76 cm | free, the sled bases are at the ends |
| BORNERO | Slotted legs made of solid oak | 140 to 200 × 90 cm, 200 to 260 × 100 cm | 76 cm | free, wide legs at the ends |
| QUADRO | crossed frame made of lacquered steel | 180 to 300 × 100 cm | 77 cm | free, the frame is set inward |
| BAKU | Trapez-shaped metal sled bases | 220 to 280 × 100 cm | 76 cm | free, according to the description, plenty of space remains on the long sides |
MILORO and BORNERO have a 4 cm thick top made of solid oak. QUADRO has a 3 cm thick oak top with a Swiss edge. With MILORO and BORNERO, you choose the top shape; for a corner bench, we recommend the rectangular version. How large the table should be for your number of people is shown in the guide Dining Table Dimensions, and more about wood quality can be found under Oak Dining Table.
A Line at the Table: Coordinating the Seat Heights of the Bench and Chairs
If guests sit significantly lower on the bench than on the chairs opposite, it will be noticeable at every meal. A commonly cited guideline for the distance between the seat and the tabletop is approximately 27 to 30 cm. The table shows the values of our models from the product descriptions.
| Combination | Bench Seat Height | Chair Seat Height | Table Height | Distance from Bench to Top |
|---|---|---|---|---|
| CORA + MILORO + DIXY | 49 cm | 49 cm | 76 cm | 27 cm |
| CORA + BORNERO + ENEI | 49 cm | Not specified | 76 cm | 27 cm |
| CORNER + QUADRO + BADSAAL 3STARR | 52 cm | 51 cm | 77 cm | 25 cm |
| CORNER + BAKU + BADSAAL 3STARR | 52 cm | 51 cm | 76 cm | 24 cm |
For CORNER, the product page lists tables between 75 and 80 cm high as suitable. If you want more legroom with the higher seat, choose a table at the upper end of this range. No seat height is specified for ENEI and RETA. If in doubt, ask before combining chairs and a bench. Details on the seat height and seat depth of benches are explained in the Bench Guide.
Space Requirements: How Large Does the Dining Area Need to Be?
A corner bench saves space because no one needs to pull out a chair behind it. You only need free space on the open sides. A calculation with actual dimensions shows the difference.
Table with Chairs All Around
For QUADRO at 180 × 100 cm, the product description specifies an area of approximately 360 × 280 cm with 90 cm clearance to walls or furniture.
The Same Table with a Corner Bench
On the bench side, the table edge is approximately 50 cm in front of the wall. With a 90 cm chair zone on the open long side and at the end, this results in approximately 50 + 180 + 90 = 320 cm by 50 + 100 + 90 = 240 cm.
| CORA Combination | Side | Table (Suggestion) | Area with 75 cm Chair Zone | with 90 cm Chair Zone |
|---|---|---|---|---|
| Module 1: 60 cm, Module 2: 180 cm | 265 × 145 cm | 200 × 90 cm | 325 × 215 cm | 340 × 230 cm |
| Module 1: 80 cm, Module 2: 200 cm | 285 × 165 cm | 240 × 100 cm | 365 × 225 cm | 380 × 240 cm |
| Module 1: 100 cm, Module 2: 220 cm | 305 × 185 cm | 260 × 100 cm | 385 × 225 cm | 400 × 240 cm |
These areas include one chair at the end. Without this chair, the length to the end of the table is sufficient in the long direction. For a shorter table, such as MILORO at 160 cm, the area decreases accordingly. If you plan a light above the table, the guide Lamp Above the Dining Table explains the height and size.
Leather, Fabric, or Velvet: the Right Upholstery for the Corner Bench
A corner bench is used more than any individual chair. This is where breakfast is eaten, homework is done, and guests sit late into the evening. With CORA and CORNER, you choose between three upholstery options.
Genuine Leather
Smooth leather can be wiped clean and develops a patina over time. Cognac, as shown in the images of CORNER, suits light oak as well as dark floors. More on this in the article Leather Bench.
Fabric
Fabric feels warm and dampens sound in the room, which is pleasant in dining areas with many smooth surfaces. Rust red, as shown with the CORA bench, looks cozy without being loud.
Velvet
Velvet has a soft sheen and gives the corner something festive. It is well suited for dining rooms where meals are eaten more in the evening. The pros and cons of the upholstery options are compared in the guide Armchair: Leather, Fabric, or Velvet.
The frames of CORA and CORNER are made of powder-coated metal. What makes this surface special can be read in the article Powder Coating for Metal, and the materials used are described on the page Materials for Products with Metal Legs.
Six Planning Mistakes You Only Notice at the First Meal
The Radiator Behind the Backrest
If the bench stands in front of the radiator, heat builds up and the valve is difficult to reach. It is better to end the short side in front of it.
The Window Sill Too Low
A backrest with a height of 87 or 89 cm only fits under a higher window sill. Also check whether the window pane can still be opened.
Table Legs in Front of the Bench
A table with four corner legs blocks access. Sled bases, aprons, or an inward-set frame like with MILORO, BORNERO, or QUADRO keep the way clear.
Two Seat Heights at the Same Table
Benches and chairs from different sources often have different seat heights. Compare the values before purchasing; our product pages list them in the description.
The Corner Ordered Mirrored
You can order CORNER R with the long side on the left or right, and the CORA modules can be arranged in a different order. To ensure the orientation fits the corner, draw the corner from above, mark the long side, and attach the sketch to the order.
Forgotten Walkways
Someone still needs to pass behind the chairs on the open side with a full plate. Tape out the area beforehand with painter's tape on the floor.
Corner Bench, Corner Bench Set, Dining Area: Terms in Austria and Germany
In both countries, the bench that encloses a corner of a room is called a corner bench. When a table and chairs are added, the trade refers to it as a corner bench set or dining area. In Austria, the dining chair is often called an armchair, which is why people there often search for "corner bench with table and armchair." In Germany, by contrast, an armchair is a padded armchair for the living room. In the kitchen, the term kitchen bench is also common. The idea is always the same: a bench along two walls, a table in front of it, and chairs on the open sides. However, a dining area with a bench also works without a corner: a straight bench along the wall and chairs opposite use the space just as well. An overview of straight benches, high benches, and hallway benches is shown in the guide Benches. Whether a bench or chairs are fundamentally better suited to you is compared in the article Dining Table with Bench or Chairs.
Made for Your Corner
A corner bench is a piece of furniture that fits exactly one corner of a room. That is why we only manufacture CORA and CORNER after you place your order, with the upholstery and frame color you have chosen. Every bench is carefully handcrafted with an eye for detail. As the manufacturer, we sell directly to you without intermediaries and are happy to advise you if your corner requires a special size.
Frequently Asked Questions About Corner Benches in the Dining Room
Which Corner Bench Fits in a Small Dining Room?
A modular bench like CORA with Module 1 in 60 cm and Module 2 in 180 cm creates sides of 265 × 145 cm. A table measuring 160 or 200 × 90 cm fits with it. You do not need a chair zone on the bench side.
What Does Corner Bench Left or Right Mean?
This usually refers to the view from the front: If the long section is on the left of the corner, the bench is called "long section left". You can order the CORNER R with the long section on the left or right. Because the terms are not standardized, please include a sketch with your order.
Which table is suitable for a corner bench?
A rectangular table whose legs do not stand at the corners in front of the bench. Sled bases like those on the MILORO and BAKU, side panels like those on the BORNERO, or an inset frame like that on the QUADRO leave the access clear.
How many people fit at a corner bench with a table?
As a guideline, you calculate approximately 60 cm of seat width per person. For the CORA, the product description states approximately three people on module 2 with 180 or 200 cm, three to four at 220 cm, and approximately one person each on the corner section and module 1. There are no fixed seat numbers. Chairs on the open sides are in addition to this.
How much space do I need behind the chairs?
Our product pages recommend 75 to 90 cm between the table edge and the wall. If you want to leave a walkway behind the chairs, plan for more.
Can the chairs and corner bench be different heights?
One to two centimeters are barely noticeable. CORA and DIXY both have a seat height of 49 cm, while CORNER and BADSAAL 3STARR are also close together at 52 and 51 cm.
Is CORA also available in other dimensions?
Yes. According to the product description, we also manufacture CORA in other dimensions upon request. The modules can be combined in different orders. Write to us via the contact page if you want other dimensions or a different arrangement, and include wall measurements and a sketch of the corner.
Does the corner bench come assembled?
Yes, our benches come assembled. According to the product description, the table legs are assembled yourself for the tables.
Put together your dining corner
Choose the bench, table, and chairs directly on the product and compare dimensions, upholstery, and colors.















