Combining Dining Table and Chairs: How to Get the Dining Set Right

Dining set guide

Combining a dining table and chairs: how to get the dining set right

A beautiful dining table alone does not make a cosy dining area. Only the right chairs turn it into a dining set where people like to linger. Yet many people buy the table and chairs at different times or in different shops. In the end the chairs are too high, the armrests hit the tabletop or the colours clash. If you plan the dining table and chairs together from the start, you avoid exactly these mistakes.

This guide is not about individual pieces of furniture but about how they work together. You will learn whether a ready-made dining table and chair set or your own combination suits you better, how many chairs fit at which table, how height and armrests interact and how to combine wood, metal, leather, fabric and velvet harmoniously. We also show eight ready-made combinations from our range with dimensions.

The key points in brief

  • Height first: there should be about 27 to 30 cm between seat and tabletop. For our dining tables, which are 76 to 77 cm high, chairs with a seat height of 47 to 50 cm are suitable; cantilever chairs at 51 to 52 cm are the upper limit.
  • Width per place (indicative): allow for the chair width plus about 10 to 15 cm of room to move. For chairs 50 to 55 cm wide, that is around 60 to 70 cm per person; for armchairs 70 to 80 cm.
  • Check the armrests: the armrests must fit under the tabletop. Measure the underside of the top (around 74 cm for a 77 cm table with a 3 cm top) and leave at least 2 to 3 cm of clearance.
  • A connecting element: table and chairs should have something in common: the type of wood, the colour of the metal frame or a shade in the upholstery.
  • Set or mix: identical chairs look calm and are the easiest option. For mix & match, use no more than two chair models and use each at least twice.

Dining table and chair set, or combine them yourself?

If you search for a "dining table and chairs set" or "dining set", you will mostly find ready-made dining sets: a table and four or six (indicative) identical chairs in one package. That is convenient but restrictive. You get exactly the table size the manufacturer intended and exactly the upholstery included in the set. The alternative is to put the table and chairs together deliberately. With us, you choose the upholstery yourself for most chairs (velvet, fabric or genuine leather), on many models also the frame colour or finish, and the dining table in the length that suits your room.

Option Advantages Disadvantages Suitable for
Ready-made set (table + identical chairs) Quick decision, guaranteed uniform look, often sold as a bundle Fixed table size, little choice of upholstery and colour, chairs often rather simply padded First flat, holiday home, small budget
Table + identical chairs chosen individually Calm overall look, table size and upholstery freely selectable, better padding possible A little more planning for height and width Most dining rooms and kitchen-diners
Mix & match (two chair models) Individual, e.g. armchairs at the ends, lively effect Needs a clear rule, otherwise it looks random Long tables, open living spaces, hosts
Table with bench and chairs Space-saving against the wall, sociable, flexible with children Less back comfort on the bench Families, niches, corner seating

A practical advantage of ordering together: table and chairs arrive in one delivery. As every piece of furniture is made to your configuration, the production time is 6 to 12 weeks. So plan your dining set in good time, for example before Christmas or a move. If you are wondering whether a bench might work instead of chairs, you will find a direct comparison in the article Dining table with bench or chairs.

Step 1: match the height of table and chair

Height is the most important technical criterion of a dining set. If it is wrong, you either sit with your knees against the top or eat as if at a children's table. What matters is the distance between the seat and the top of the tabletop: 27 to 30 cm is considered comfortable, 25 cm is the minimum. Depending on the model, our dining tables are 76 cm (e.g. ERDA, DAINTRO) or 77 cm high (e.g. ZÜRICH, LAUSANNE, TALMA).

Table height Ideal seat height Examples from our range (seat height)
76 cm 46–49 cm SCOT (49 cm), SOLO (49 cm), ALBA (49 cm), SARA (49 cm)
77 cm 47–50 cm JAY (49 cm), PISTA (50 cm), TREPIED (47 cm), MATEO DINING (49 cm)
77 cm, cantilever chair 51–52 cm (upper limit) FLEET OHIO (52 cm), FLEET SHANGHAI (52 cm), FLEET SHANGHAI with armrests (51 cm)

Cantilever chairs give slightly when you sit down, so the unloaded seat height may be a little higher. According to the manufacturer, the FLEET models suit tables 75 to 80 cm high. Very soft padding also sinks 1 to 2 cm. How to assess seat height, seat depth and backrest on an individual chair is explained in our Dining chair guide. All table dimensions for 2 to 12 people (indicative) can be found in the article Dining table dimensions.

Step 2: how many chairs fit at the dining table?

The most common question when combining is: how many chairs fit at my table (indicative)? The often-quoted 60 cm rule is a minimum. It is better to calculate with the actual chair width: chair width plus 10 to 15 cm of space. A chair 52 cm wide therefore needs about 62 to 67 cm, an armchair 63 cm wide around 75 cm. With rectangular tables, only the length between the table legs counts; with round tables, the circumference.

Table (model, dimensions) Comfortable with narrow chairs (50–53 cm) With armchairs (57–63 cm)
TALMA, round Ø 120 cm 4 3–4
ERDA, round Ø 150 cm 6 5
DAINTRO, 160 × 90 cm 4 (6 with ends) (indicative) 4
ZÜRICH, 200 × 100 cm 6 4–6
MIKADO SLIM, 220 × 100 cm 6–8 6
LAUSANNE, 240 × 100 cm 8 6–8
GENEVA, oval 240 × 120 cm 8 6–8
MIKA, semi-oval 260 × 110 cm 8–10 8

Example of "6 dining chairs" (indicative): six SOLO chairs 52 cm wide need three places per long side at a rectangular table, i.e. 3 × 52 cm chair width plus gaps. From a table length of 180 cm this just about works; at 200 cm you sit comfortably. If you have guests occasionally, plan two extra places at the ends. At least 80 cm should remain free behind the chairs, and preferably 100 to 120 cm as a walkway. Whether a round or square table suits your room better can be found in the guide Round or square dining table.

Step 3: armrests and tabletop – does the chair fit underneath?

Armchairs and dining armchairs (often also called carver chairs) are more comfortable, but they need space in width and height. So that the chair can be pushed under the table after the meal, the armrest must be lower than the underside of the tabletop or apron. On our tables that are 77 cm high with a 3 cm top, the underside is about 74 cm; with a 4 cm top about 73 cm. With DAINTRO (76 cm, 4 cm top) it is around 72 cm. Also check whether frame struts run under the top.

Chair Armrest height Width Under a 72–74 cm top?
CAVEL 61 cm 62 cm Yes, plenty of room (11–13 cm)
FLEET SHANGHAI with armrests 65 cm 57 cm Yes (7–9 cm clearance)
TREPIED 67 cm 68 cm Yes (5–7 cm clearance), but needs a lot of width
SARA 68 cm 63 cm Yes (4–6 cm clearance)
PISTA 69 cm 60 cm Yes, just (3–5 cm clearance)
SERENA 75 cm 60 cm No, stands in front of the table – ideal at the end
Rule of thumb: table height minus top thickness minus any apron = clearance. The armrest should stay at least 2 to 3 cm below it. Armchairs that don't fit under the table are not a mistake, but they permanently need more space in the room.

If you only use armchairs at the ends, you get the best of both worlds: comfort for the hosts and enough space on the long sides. Read more about wide seating at the dining table in the article Fauteuils & dining armchairs and in the Dining armchairs collection.

Step 4: match the style of table and chairs

Table and chairs don't have to come from the same series. What matters is that they speak the same language. A simple method: decide who plays the leading role. If the table is the statement, for example with a striking frame or a thick solid wood top, the chairs stay calmer. If the table is simple, the chairs can stand out. The following combinations work in many homes, whether a period flat or a new build:

Scandinavian

Light oak table with wooden legs, combined with chairs with a beech frame and fabric upholstery in beige, grey or sage. Example: ERDA with SCOT.

Modern & industrial

Oak top on a black steel frame, combined with cantilever chairs with a black frame and leather upholstery. Example: MIKADO SLIM with FLEET OHIO.

Homely & cosy

Oval or round table with soft upholstered chairs in velvet or a bouclé look. Example: GENEVA with ALBA.

Modern country style

Solid wood table with a wooden frame and sturdy chairs in genuine leather in cognac or brown. Example: DAINTRO with RESI.

Design accent

Simple table combined with chairs with a striking shape or swivel function. Example: TALMA with TREPIED. More ideas in the article Designer chairs.

Visual weight is also important. A table with a 4 cm thick top and sturdy legs can take chairs with presence. A delicate table with a slim frame such as ZÜRICH is better suited to light chairs with an open backrest than to bulky armchairs. An overview of all table shapes and types can be found in the guide Buying a dining table.

Step 5: combine colours and materials of table and chair

Almost all our dining tables have a solid oak top. This makes the base warm and natural, and the question is: tone on tone or deliberate contrast? Both work as long as the choice is clear. Half contrasts, such as a chair in almost but not quite the same wood colour, quickly look like a mistake.

Table Chair (upholstery / frame) Effect Tip
Natural oak, black steel frame Genuine leather in black or anthracite, black frame Graphic, modern, clean Choose the same frame colour for table and chair
Natural oak, black steel frame Genuine leather in cognac, black frame Warm and high-quality, a classic Cognac repeats the wood tone of the top
Natural oak, wooden legs Fabric in beige, cream or light grey, beech legs Light, calm, Scandinavian Ideal for small rooms and kitchen-diners
Natural oak, wooden legs Velvet in green, blue or terracotta Lively, homely Repeat the colour at least twice in the room (cushions, rug)
Natural oak, any frame Velvet or fabric in dark grey Elegant, understated Suits almost any floor
Natural oak, steel frame Mix: leather at the ends, fabric on the long sides Deliberately designed Choose the same colour family, e.g. brown and beige

Besides looks, everyday life counts. Genuine leather can be wiped with a damp cloth and is often the more relaxed choice with children; fabric is breathable and pleasantly warm; velvet looks elegant and rich in colour. The material differences are explained in detail in our articles Leather or upholstered chairs?, Oak wood quality and Electrostatically coated metal. How to coordinate colours throughout the room is shown in the article Combining colours.

Mix & match: different chairs at one table

Different chairs at the same table are a popular interior trend. For the mix to look intentional, it needs rules. Three arrangements have proven themselves:

1

Emphasise the ends

Two armchairs or dining armchairs at the head ends, identical slim chairs on the long sides. The classic for rectangular and oval tables from 200 cm.

2

One model, two upholsteries

The same chair model in two colours or materials, for example four chairs in beige fabric and two in cognac genuine leather. The same silhouette holds everything together.

3

Two models alternating

Two different chairs alternating, but with the same seat height and a similar backrest height. Works especially well at long tables.

Important when mixing: seat heights should differ by no more than 2 to 3 cm, otherwise guests sit at different eye levels. Combine no more than two chair models and use each at least twice. And connect the models through a common element, such as the frame colour. This is particularly easy with the FLEET models, because they are available with and without armrests and the frame colour can be chosen. All cantilever chairs can be found in the Cantilever chairs collection.

8 ready-made combinations from our range

To give you an idea, we have put together eight dining sets from currently available models. You choose the upholstery of the chairs (velvet, fabric or genuine leather) yourself on each product page.

Dining set Table Chairs Seats (indicative)
Scandinavian round ERDA Ø 120 cm 4 × SCOT 4
Round & modern TALMA Ø 130 cm 4 × OLE 4
Wood on wood, compact DAINTRO 160 × 90 cm 4 × RESI 4
Family table ZÜRICH 200 × 100 cm 6 × SOLO 6
Homely oval GENEVA 220 × 110 cm 6 × ALBA 6
Modern cantilever MIKADO SLIM 220 × 100 cm 6 × FLEET OHIO 6
Semi-oval with armrests MIKA 240 × 110 cm 6 × SARA 6
Host set for 8 (indicative) LAUSANNE 240 × 100 cm 6 × FLEET SHANGHAI + 2 × FLEET SHANGHAI with armrests 8

The Scandinavian dining set with ERDA and SCOT. If you are looking for six places (indicative) and good value, ZÜRICH with six SOLO chairs is a good choice. If it should be formal, the host combination with cantilever armchairs at the ends is the first choice. Larger round tables such as RODO with Ø 152 cm offer room for six people (indicative), while compact round tables such as TOSCA with Ø 120 cm also fit into smaller dining areas.

How to combine yourself: first choose the table in the right size from the dining tables or the round dining tables, then the chairs from the dining chairs. Check seat height, width and, if applicable, armrest height with the tables above.

Table shape and chairs: round, rectangular, oval

The shape of the table influences which chairs look good. At a round table you see all the chairs at once, so identical models look particularly calm here. Slightly narrower chairs without armrests make the best use of the circumference. Rectangular tables allow a hierarchy: armchairs at the ends, slim chairs on the long sides. Oval and semi-oval tables combine both. They have no sharp corners but still offer clear head ends. A selection can be found under rectangular dining tables, oval dining tables and semi-oval tables.

If your dining table is oak and you want to know what matters in wood quality and finish, read the article Oak dining table. For dining areas with a bench against the wall, take a look at the Dining benches collection.

Typical mistakes when combining a dining table and chairs

  • Chairs bought without a tape measure: the seat height doesn't match the table height or the armrests hit the top. Always measure the table first.
  • Too many chairs planned: six wide upholstered chairs at a 160 cm table look cramped (indicative). Better four comfortable places and two places at the ends for guests.
  • Forgetting the table legs: with tables with legs at the corners, the space between the legs counts, not the full length of the top.
  • Everything equally heavy: a solid table plus bulky armchairs all round makes the room feel cramped. One element should look lighter.
  • Mixing without a rule: three or more different chairs without a common element look random rather than intentional.
  • Upholstery not chosen for everyday life: light fabric with small children or pets quickly creates work. Genuine leather or darker tones are more relaxed.

Checklist: 5 steps to the right dining set

1

Measure the room and table

Note the room size, table dimensions, table height and the clearance under the top. Allow 80 cm of space to move all round.

2

Decide on the number of places (indicative)

Distinguish between everyday use and guests. Calculate with the chair width plus 10 to 15 cm per place (indicative).

3

Choose the chair type

Upholstered chair, cantilever chair, armchair or swivel chair. Seat height 27 to 30 cm below the tabletop.

4

Coordinate style and colour

Define a connecting element: wood tone, frame colour or upholstery colour.

5

Order together and allow for production time

Order table and chairs together and allow for a production time of 6 to 12 weeks.

Frequently asked questions about dining tables and chairs

Do the dining table and chairs have to be from the same series?

No. What matters is that height and proportions fit and that there is a connecting element, for example the type of wood, the frame colour or a shade in the upholstery. Many of the most beautiful dining sets are combined individually.

What seat height suits a 77 cm high dining table?

A seat height of 47 to 50 cm is ideal, leaving 27 to 30 cm to the tabletop. Cantilever chairs may be slightly higher at 51 to 52 cm because they give a little when you sit.

How many chairs fit at a 200 × 100 cm table (indicative)?

Six chairs comfortably, three per long side. With two extra places at the ends, eight people can be seated occasionally; with armchairs, more like four to six (indicative).

Is a ready-made dining table and chair set worth it?

A set is practical if you want to furnish quickly and simply. If you want to decide on table size, upholstery and comfort yourself, your own combination is the better choice. With us, you choose the table size and chair upholstery individually.

Do chairs with armrests fit under every table?

Not always. The armrest must stay at least 2 to 3 cm below the underside of the tabletop or apron. On our 77 cm high tables with a 3 cm top, this edge is about 74 cm, so armrests up to about 70 cm fit underneath.

Which chairs suit an oak table?

Oak goes well with chairs with beech legs and light fabric (Scandinavian), cantilever chairs with a black frame and leather (modern) and upholstered chairs in velvet (homely). Cognac leather picks up the warm wood tone particularly beautifully.

What is the production time for a dining table and chairs?

The production time is 6 to 12 weeks, because every piece of furniture is made to your configuration.

Put together your dining set

Choose your dining table in the right size and combine it with chairs in your preferred upholstery. If you have questions about dimensions and combinations, we are happy to help.

Products for sale

Armlehnstuhl MAREI in Elfenbein, Schrägansicht
DINING CHAIRS
Freischwinger MOCANU im Industrial Stil in Cognac
OFFICE CHAIRS
Schalenstuhl ALBA in Greige, Schrägansicht
KITCHEN CHAIRS
Barhocker OLE mit Rückenlehne in Creme, Schrägansicht
BAR STOOLS
Barhocker SAMO in Taupe mit Armlehnen
KITCHEN ISLAND CHAIRS
Polsterstuhl SERENA mit Holzgestell, Schrägansicht
FABRIC CHAIRS
Bürosessel BOSS P mit Holzrückseite in Creme, Schrägansicht
ERGONOMIC OFFICE AND VISITOR CHAIRS
Besucherstuhl BIG STAR V mit Holzarmlehnen in Braun, Schrägansicht
ERGONOMIC OFFICE CHAIRS
Armlehnstuhl DORIAN ARM in Caramel, Schrägansicht
DESIGNER CHAIRS
Sessel RUSO in Grau auf Metallgestell, Schrägansicht
FAUTEUILS
Vintage Sofa GYMA in Olivgrün, frontal
SOFAS & COUCHES
Sessel MODIO dunkelbraun, bauchige Form, frontal
ARMCHAIRS
Sitzbank CABALLERO aus Büffelleder in Cognac, Schrägansicht
BENCHES
YANRO mit ovaler Platte, Schrägansicht
TABLES
Satztische RION, drei runde Tische mit Platten in Braun, Beispielausführung mit messingfarbenem Gestell
COFFEE TABLES